一般废塑料和废轮胎的出油率都有多少？

    一般废塑料和废轮胎的出油率都有多少？

 　答：废塑料的出油率很复杂，不同的废塑料出油率都不一样，相差很多。我下边的客户多用于再生纸厂的下脚料，按湿的标准来计算，一般1吨料(2.5m3~3m3左右)炼一桶毛油(一桶毛油180kg左右，冬季有时可装195~200kg);含水分5~6%的干料，纸浆也分选过了，出油率高的可达到60%;其他废料如废弃农膜，编织袋，盖大楼的安全网等一般不低于50%;至于特殊一点的废塑料，需经过实验室化验。

　　废轮胎出油率：轮胎的出油率在45%~50%左右(美国微波炼油可达到52%，我们国家现在还没有这技术。)

　　本公司拥有优秀的实验室和炼油厂，随时可做免费化验生产，以检查你的原料实际出油率。

　　A: Different oil yield rate. Most of our customers use scraps offcut from recycled paper plant. According to the wet raw materials, 1tin of materials(2.5m3~3m3)can refine to a barrel of Crude Oil (per barrel crude oil is around 180kg, 195~200kgwinter ); As to dry material with moisture of 5% to 6% paper pulp has been the separation, the oil yield rate can be up to 60%; Other wastes such as wastes agricultural film, bags, building safety nets, the oil yield rate is not less than 50%; there need laboratory tests for other special plastics waste.

　　Scrap tires oil yield rate: 45%~50%

　　We have fist-class laboratories refineries to help you check actual oil yield of your raw materials.